Обзоры и Сравнения - Наше Кино







 

#1446  
Дата: 2009-01-28 21:34 GMT
Валентина   Страна: 
Сообщений: 1
Помогите найти фильм Мексиканец
Производство: Мосфильм
Год выпуска: 1955
Я хочу иметь этот фильм в любом формате.
Совсем и всеми забытый фильм, а ведь это замечательный фильм.

15

Holmes On Homes - S5E05 - Bargain Basement.avi


POTLIGHT + IMSULATION
HGTV_Disaster_DIY_S2_Ep2015
IMSULATION
HGTV_HolmesOnHomes_Ep6079_pt5_579FC592

FRAIMING
HGTV_Disaster_DIY_S2_Ep2025
HGTV_Disaster_DIY_S2_Ep2025_pt2 ++++
HGTV_Disaster_DIY_S2_Ep2039_pt2 ++ bluWOOD

FIREPLACE
HGTV_Disaster_DIY_S2_Ep2025_pt3


MUDDING DRY-WALL
HGTV_Disaster_DIY_S2_Ep2039_pt2


cABINETS KITHEN

HGTV_Disaster_DIY_S2_Ep2039_pt3






ALL IN PICTURES

My Basement
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31122

mart242 BASEMENT
http://www.redflagdeals.com/forums/my-basement-progress-528256/
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=14933

my basement is raised and the walls are part masonry and part wood framing.
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32388


Basement Pony Wall Vapour Barrier/Air Barrier question
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30823

Virgin Renovator
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=29275


+++++++++++++++++++++++++++


SPRAYFOAM

http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31549

http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32103

2"
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31549
+++++++++++++++++++++++++++++++++++++++++++

BATHROOM

Basement Bathroom Questions
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30712

Building Basement Bathroom
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30219

+++++++++++++++++++++++++++++++++++++++



FLOOR


Gencon
Moderator
Depending on the floor condition, I sometimes just use foamboard adhesive to hold everything in place. A full, large size tube per sheet

per layer.Probably more expensive material wise than Tapcons, but faster, and I dont have potentially hundreds of holes in the slab.

+++

You may get a few different answers. Heres the BEST way, in my opinion:

In order:

Waterproof the entire OUTSIDE of the foundation wall-new properly installed weepers and backfilled properly.
2" XPS foamboard glued to the foundation on the inside up to the underside of the joists.
1" foamboard glued to the floor.
5/8" T&G OSB subfloor glued to the foamboard
2x4 stud wall against the foamboard. .
Now have the rim joist area spray foamed to the point just past the front of the studs.
Electrical, plumbing , etc.
Roxul in the ceiling and walls.
Drywall.

Foam/Plywood Subfloor in Basement Bathroom
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31549


xps and osb seams
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31831

http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32487


Problems with Tapcons in basement floor
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30989


Basement Stairs after adding floor insulation
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30592

Securing 5/8's Plywood On Top Of Foam Board
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=28724

screws interval requirement when flooring basement subfloor
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=27520

varun on Thu Oct 08, 2009 10:25 am

I did 12 screws per sheet, focusing on the edges where the two sheets meet so they do not have any flex there.
If the floor was a bit uneven, I added a few more screws where necessary.
Another tip - use the 3/16" screws for most of your work, but if you have a spot that is having problems use a 1/4" screw. Doesn't sound like much difference but it is huge compared to the 3/16" and has way more holding power.
Gencon recommends glue, but Mike Holmes says no glue on the floor. Both have valid points for pros and cons. My basement floor was not 100% perfect, so I am happy I went with screws because it allowed me to conform the OSB to the floor better and avoid any bouncy spots.


++++++++++++++++++++++++

CEILING

Insulating around potlights in the basement?
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31369

Basement ceiling insulation
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31354

Soundproofing basement pot lights
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30712


Basement ceiling. Roxul Safe'n'Sound. Help with size.
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=29728

++++++++++++++++++++++++++++++

FRAIMING

How to attach bottom plate to 5/8 ply with 1" foam under
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30336


Basement Framing Questions..
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=29914


++++++++++++++++

Basement Furnace Room
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31969


Insulating water pipes??
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=31340


CRACKS

how to repair a crack in the foundation?
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=28706

Best way to waterproof a basement from the inside?
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30347

Foundation cracks (epoxy, polyurethane or excavation?)
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32502

Foundation Membrane (Outside)
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32528


New Home foundation repair
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32278

crack in foundation now in brick
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32022


DRYWALL:

Hainging drywall? Studs not 16" on centre
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=32172


Drywall thickness for basement ceiling and walls?
http://www.mikeholmesfanforum.com/phpbb3/viewtopic.php?f=14&t=30323


Pony Wall

http://oee.nrcan.gc.ca/residential/personal/new-home-improvement/choosing/insulation-sealing/basement/khi-inbasement.cfm?attr=4

Insulating a pony wall.

A pony wall consists of short sections of wood frame wall sitting on top of a conventional concrete foundation. Insulate the wood-frame

section between the studs, and insulate the concrete section on the interior (if there are no moisture problems). The insulation on the

concrete is extended up about 20 cm (8 in.) to overlap with the frame section. A ledge is created at this point (see illustration above).







Gencon
Moderator

Re: Renovating the basement, question about subfloor.


1) 5/8" T&G OSB works best. You need the T&G because you dont have support under the seams to fasten to.

2)Put your 2" foam on the walls first, then your subfloor gets completed , then you build your walls on top of the OSB. Gives you

something to nail the bottom plate to.Seal the joint between your wall foam and floor foam.

3)The subfloor foam will go right against the wall foam. seal this joint-PL300 (foam board adhesive), caulking, canned spray foam or

sheething tape.

4)IF your basement floor is very level, you can get away with just gluing the OSB on top of the foamboard. You may need a Tapcon or 2 for

a couple of spots if there is a depression. If the floor is quite uneven then its a good idea to secure the whole thing down with

Tapcons.

5)You can use a foamboard subfloor and tradition insulated 2x4 stud wall with vb. Not a problem. Remeber to install housewrap against the

foundation first. Logo out.

6)If using 2" of XPS, it will act as the VB so the layer of 6mil poly on the inside is not required.
Do it once. Do it smart.
   
#1451  
Дата: 2009-02-09 04:15 GMT
Сашура   Страна: 
Сообщений: 185
Обзоров: 874
Уважаемая Валентина, этот фильм только что вышел у компании Мастер-тэйп. И его можно купить в DVD-формате.
   

Страницы: > 1 <